Power Station PS-300 with integrated sine wave inverter

• Mobile, independent power supply
• 230VAC, max. 300W real sinus output voltage
• 12VDC output socket max. 10A
• With high-quality AGM 12V/20Ah rechargeable battery
• With charging status indication

No matter whether you want to operate 12V or 230V devices, you are optimally prepared for any case with this Power Station.
The PS-300 offers independent power supply, wherever it may be required: in your leisure time, your job, for camping or on the road.
It may be used to operate consumers such as TVs, Sat systems, cool boxes, air pumps, electric tools, household appliances up to 300 W anywhere.
The powerful AGM 12V/20 Ah battery may be charged optionally over the 230V network using the supplied charger or in your car using the 12V charging adapter.
You may read the charging status of the battery on the LED display at any time.
The 12V and 230V load outputs may be connected separately and may be used simultaneously.
The PS-300 is short-circuit proof and is equipped with both deep discharge protection and an overload cut-off device.

The pack contains:

Power Station PS-300; 12V/ 2.7A charger; 12V charging adapter; operating instructions

Technical specifications

GENERAL
Battery type: 12V/20Ah AGM (Absorbent Glass Mat)
Charger: 230VAC, 13.8–14.7V DC max. 2.7A
Charging adapter: 12VDC, 12–14.4V DC max. 5A
Fuse for charging adapter: F 5A; 6.3x32 mm
Cable length for 12V charging adapter: 150cm
Dimensions: 240x145x215 mm
Weight: 10,4kg

12VDC output
Max. output current: 10A
Max. time of operation at 10A: 85min. (with full battery)
Idle current: 4mA
Deep discharge protection: yes
Fuse: T10A (accessible from outside)

230VAC output
Output voltage: 225VAC (+5/-8%) 50 Hz
Continuous output power: max. 300VA (cos φ >0.8)
Continuous of output current: 1,4A_eff
Max. time of operation at 300W: 30min. (with full battery)
Idle input power: 3,6VA
Deep discharge protection: yes
Overload cut-off device: yes